Nicknames
Nicknames replace the standard 8-byte World Wide Names of switches, directors,
and attached nodes. By setting a nickname, you can assign a more meaningful
name than a WWN. When you assign a nickname, the nickname replaces the
World Wide Name in the HAFM views.
Note:
Adding Nicknames
To add a nickname:
1. Choose Configure > Nicknames.
Figure 31: Configure Nicknames dialog box
Note:
columns are blank.
High Availability Fabric Manager User Guide
Nicknames may have a maximum of 32 characters.
The Configure Nicknames dialog box displays with existing nicknames that
have already been configured
The left column in the dialog box shows the selected WWN, while the right
column shows the assigned nickname.
If no nicknames are configured, the World Wide Name and Nickname
(Figure
31).
Using the Menu Bar
73