Fc Traceroute Dialog Box; Fc Traceroute Dialog Box; Device Information And Nicknames - HP StorageWorks 8/20q User Manual
Hp storageworks 8/20q and sn6000 fibre channel switch enterprise fabric management suite user guide (5697-0420, june 2010)
Hide thumbs
Also See for StorageWorks 8/20q:
- Command line interface manual (330 pages) ,
- Reference manual (188 pages) ,
- User manual (158 pages)
Table of Contents
Advertisement
FC Traceroute dialog box
The FC TraceRoute dialog box
destination and back.
Figure 18
FC TraceRoute dialog box
To trace a Fibre Channel connection:
1.
Select Fabric > FC TraceRoute to open the FC TraceRoute dialog box.
2.
Open the Source drop-down list, and select a source port.
3.
Select the Port WWN or Port Address option.
4.
Open the Destination drop-down list, and select a destination port.
5.
Select the Port WWN or Port Address option.
6.
In the Maximum Round-trip Hops list, select a value from the drop-down list (1–32).
7.
Click Trace and view the results in the text window.
Device information and nicknames
Devices are hosts and storage targets connected to the switch. A nickname is a user-definable, meaningful
name that can be used in place of the World Wide Name (WWN). Assigning nicknames makes it easier
to recognize device ports when zoning your fabric and when viewing the Devices data window. The
following describes how to view and manage device information and nicknames.
38
Managing Fabrics
(Figure
18) enables you to map the route trip a frame takes from source to
Advertisement
Table of Contents
