HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 204

Information and Error Messages
Table 9: High Availability Fabric Manager Messages (Continued)
Fabric Log will be lost
once the fabric unpersists.
Do you want to continue?
Fabric not persisted.
Field cannot be blank.
Field has exceeded
maximum number of
characters.
File transfer aborted.
Invalid character in field.
Invalid name.
Invalid network address.
204
Message
When you unpersist a
fabric, the corresponding
fabric log is deleted.
The user attempted to
refresh or clear the Log
dialog, after a fabric was
unpersisted. When you
unpersist a fabric, the
corresponding fabric log
is deleted.
The data field requires an
entry and cannot be left
blank.
The maximum number of
data entry characters
allowed in the field was
exceeded.
The user aborted the file
transfer process.
An invalid character was
entered in the data field.
One of the following
invalid names was used:
CON, AUX, COM1,
COM2, COM3, COM4,
COM5, COM6, COM7,
COM8, COM9, LPT1,
LPT2, LPT3, LPT4, LPT5,
LPT6, LPT7, LPT8, LPT9,
NUL, or PRN.
The IP address specified
for the product is
unknown to the domain
name server (invalid).
Description
High Availability Fabric Manager User Guide
Action
Click Yes to unpersist the
fabric or No to cancel the
operation.
Clear the log dialog after
the fabric is unpersisted.
Enter appropriate
information in the data
field.
Enter the information
using the proscribed
number of characters.
Verify the file transfer is to
be aborted, then click OK
to continue.
Remove invalid characters
from the entry.
Choose a valid name and
retry the operation.
Verify and enter a valid
product IP address.