HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 212

Information and Error Messages
Table 9: High Availability Fabric Manager Messages (Continued)
This switch is currently
part of this fabric and
cannot be removed from
the Fabric Membership
List. Isolate the switch from
the fabric prior to
removing it from the
Fabric Membership List.
This user name has
already been assigned.
Too many members
defined.
You do not have rights to
perform this action.
You must define an SMTP
server address.
You must define at least
one E-mail address.
You must define at least
one remote network
address.
You must download the
HAFM client via the web
install to continue.
212
Message
User attempted to remove
a switch from the Fabric
Membership List using the
Fabric Binding option, but
the switch is still part of
the fabric.
The specified user name is
already assigned and
configured.
The maximum number of
zone members that can
be defined to the
application was reached.
Configured user rights do
not allow this operation to
be performed.
A simple mail transfer
protocol (SMTP) server
address must be defined
and configured for e-mail
to be activated.
At least one e-mail
address must be defined
and configured for e-mail
to be activated.
At least one IP address for
a remote workstation must
be configured for a
remote session to be
activated.
An attempt was made to
download the
application to a remote
workstation (client) using
an improper procedure.
Description
HAFM
HAFM
High Availability Fabric Manager User Guide
Action
Remove the switch from
the fabric by setting the
switch offline or blocking
the E_Port where the
switch is connected.
Modify (to make it
unique) or delete the
duplicate name.
Delete an existing zone
member before adding a
new zone member.
Verify user rights with the
customer's network
administrator and change
as required using the
Configure Users dialog
box.
Define the SMTP server
address at the Configure
E-Mail dialog box.
Define an e-mail address
at the Configure E-Mail
dialog box.
Define an IP address for
at least one remote
workstation at the
Configure Sessions
dialog box.
Download a compatible
HAFM
version of the
application to the remote
workstation (client) using
the web install procedure.