Configuring Zoning through the HAFM
This section provides procedures for using the menu options available through the
HAFM Fabrics tab to configure and manage zoning. For information on other
menu options, refer to
To configure new zones and a zone set, then activate a new zone set for the fabric,
follow these three steps:
1. Create zones. Follow steps under
2. Create a zone set. Follow steps in the
3. Activate the zone set. Follow steps under
Note:
should obtain help from HP's professional services organization before configuring
zoning.
Using the Zoning Library
Open the Zoning Library dialog box in either the Products or Fabrics tab by
choosing Zoning Library from the Configure menu on the menu tab.
Figure 60: Zoning Library dialog box
High Availability Fabric Manager User Guide
Chapter
under
"Configuring Zoning through the
section on page 148.
Designing zoning can be a complex task, especially for multiswitch fabrics. You
3.
Configure Zones and Zone Sets
HAFM."
"Configure Zones and Zone
"Activate Zone
Fabric Zoning
on page 148
Sets"
Sets" on page 162.
145