HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 199

Table 9: High Availability Fabric Manager Messages (Continued)
Cannot display route on a
one switch fabric.
Cannot display route. All
switches in route must be
managed by the same
server.
Cannot display route. All
switches in route must
support routing.
Cannot display route.
Device is not a member of
a zone in the active zone
set.
Cannot display route.
Error 9.
Cannot display route. No
active zone enabled.
Cannot have spaces in
field.
Cannot modify a zone set
with an invalid name.
Rename zone set and try
again.
High Availability Fabric Manager User Guide
Message
You cannot show routes
between end devices in a
fabric when configuring
Show Routes (Fabrics
menu).
You cannot show the
route between devices
that are attached to
switches or directors
managed by a different
HAFM server.
You cannot show the
route through a fabric that
has switches or directors
which do not support
routing.
You cannot show the
route for a device that is
not a member of a zone
in the active zone set. The
source node that you
have selected is not part
of a zone in the active
zone set.
An internal error has
occurred while you were
trying to view routes.
You cannot show the
route through a fabric
with no active zone.
Spaces are not allowed as
part of the entry for this
field.
A zone set must have a
valid name to be
modified.
Information and Error Messages
Description Action
Error displays when
attempting to show routes
on a fabric with only one
switch. Configure the
Show Route option on a
multiswitch fabric.
Make sure devices named
in Show Routes dialog
box are attached to
products managed by this
HAFM server.
The route must contain
only edge switches or
directors that support
routing.
Enable the default zone
or activate the zone for
the device before
attempting to show the
route.
Contact the next level of
support to report the
problem.
Enable the default zone
or activate a zone set
before attempting to show
the route.
Delete spaces from the
field entry.
Assign a valid name to
the zone set, then you can
modify through the
Modify Zone Set dialog
box.
199