HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 89

Either the product name or network address, WWN, domain ID, or nickname (if
configured) displays at the bottom of the icon. Select the display through Display
Options in the view's right-click pop-up menu from the drop-down menu on the
tool bar. Refer to
Note:
displays the network address below the icon. If the network address displays inside the
icon, moving the cursor over the icon displays the product name below the icon.
The most critical status reflected by a product in the view is also reflected in the
Products status bar in the left corner of the HAFM status bar. For example, if a
product is degraded, a yellow triangle displays in the status bar.
High Availability Fabric Manager User Guide
Status indicator. This is the colored symbol behind the product's illustration
in the icon.
— A blinking red and yellow diamond means that the product has failed and
requires immediate service.
— A yellow triangle means that the product is degraded, but is still
performing as designed.
— A green circle means that the product is fully operational.
— A gray square means that the HAFM cannot determine product status.
If a status symbol does not display behind the product, the product is not
managed by the HAFM server to which you are logged in.
"View Pop-Up
Product Name — Select this option to display the product's name in the icon
label. Change a product's name through the Product Manager application.
Refer to your Product Manager user manual for instructions.
Network Address — Select this option to display the product's IP address or
DNS (domain name server) host name in the icon label. Configure network
addresses through the New Product dialog box.
World Wide Name — Select this option to display the product's 8-byte
WWN.
Domain ID — Select this option to display the product's domain
identification number (1-31) assigned by the fabric.
Nickname — Select this option to display the nickname, if configured
through the Configure Nicknames dialog box (Configure menu on menu
bar). If the nickname is not configured, the WWN displays instead.
If the product name displays inside the icon, moving the cursor over the icon
Menu" in the next section for details.
Using the Products View
89