HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 210

Information and Error Messages
Table 9: High Availability Fabric Manager Messages (Continued)
The maximum number of
products of this type has
already been configured.
The maximum number of
remote network addresses
has already been
configured.
The maximum number of
members has already
been configured.
The maximum number of
users has already been
configured.
The maximum number of
zone sets has already
been configured.
The maximum number of
zones allowed has
already been configured.
The maximum number of
zones per zone set has
already been configured.
The nickname does not
exist.
The nickname is already
assigned. Either use a
different name or do not
save the name as a
nickname.
210
Message
The number of products of
this type (48) that can be
defined to the
application was reached.
A maximum of four IP
addresses for remote
workstations can be
configured at the Session
Options dialog box. That
number was reached.
The maximum number of
unique members is 4097.
The maximum number of
members is 8192.
The number of users (16)
that can be defined to the
HAFM
reached.
The maximum number of
zone sets that can be
defined to the
application was reached.
The maximum number of
zones that can be defined
to the
was reached.
The maximum number of
zones that can be defined
in a zone set to the
application was reached.
The entered nickname
does not exist in the
fabric.
The entered nickname
already exists in the
fabric. Each nickname
must be unique.
Description
HAFM
application was
HAFM
HAFM
application
HAFM
High Availability Fabric Manager User Guide
Action
Delete an existing product
of this type before adding
a new product.
Delete an existing IP
address before adding a
new IP address.
Delete members that are
no longer needed to
allow new members to be
configured.
Delete an existing user
before adding a new
user.
Delete an existing zone
set before adding a new
zone set.
Delete an existing zone
before adding a new
zone.
Delete an existing zone
before adding a new
zone to the zone set.
Configure the nickname
to the appropriate product
or choose an existing
nickname.
Define a different
nickname.