HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 198

Information and Error Messages
Table 9: High Availability Fabric Manager Messages (Continued)
Are you sure you want to
delete this user?
Are you sure you want to
delete this zone?
Are you sure you want to
overwrite this zone set?
Are you sure you want to
remove all members from
this zone?
Cannot add a switch to a
zone.
Cannot connect to HAFM
server.
Cannot delete product.
Cannot disable Fabric
Binding while Enterprise
Fabric Mode is active.
198
Message
The selected user will be
deleted from the list of
user definitions.
Requesting confirmation
to delete the specified
zone.
The selected zone set will
be overwritten in the
zoning library.
All members will be
deleted from the selected
zone.
The device that you are
attempting to add to the
zone is a switch, which
cannot be added to a
zone.
The
a remote workstation
could not connect to the
HAFM server.
The selected product
cannot be deleted.
You attempted to disable
Fabric Binding through
the Fabric Binding dialog
box, but Enterprise Fabric
Mode was enabled.
Description
HAFM
application at
High Availability Fabric Manager User Guide
Action
Click Yes to delete the
user or No to cancel the
operation.
Click Yes to confirm the
deletion of the zone or No
to cancel the operation.
Click Yes to overwrite or
No to cancel.
Click Yes to delete the
members or No to cancel
the operation.
Specify the port number
or corresponding World
Wide Name for the
device you want to add to
the zone.
Verify the HAFM server
internet protocol (IP)
address is valid.
Verify the HAFM
server-to-product link is
up.
If the link is up, the HAFM
server may be busy.
Another Product Manager
instance may be open.
The user may not have
permission to delete the
product.
Disable Enterprise Fabric
Mode through the
Enterprise Fabric Mode
dialog box in HAFM
before disabling Fabric
Binding.