McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 546

Fw 08.01.00 mcdata e/os snmp support manual (620-000131-630, november 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

SNMPv3 MIB
G
snmpTargetAddrTMask
E/OS SNMP Support Manual
G-46
current
Status
Information about a particular mask and mms value."
Description
AUGMENTS
Sequence
::= { snmpTargetAddrExtTable 1 }
SnmpTargetAddrExtEntry ::= SEQUENCE{
snmpTargetAddrTMask
snmpTargetAddrMMS
OCTET STRING (SIZE (0..255))
Syntax
read-create
Max Access
current
Status
The mask value associated with an entry in the
Description
snmpTargetAddrTable. The value of this object must have the same
length as the corresponding instance of snmpTargetAddrTAddress,
or must have length 0. An attempt to set it to any other value will
result in an inconsistentValue error.
The value of this object allows an entry in the snmpTargetAddrTable
to specify multiple addresses. The mask value is used to select which
bits of a transport address must match bits of the corresponding
instance of snmpTargetAddrTAddress, in order for the transport
address to match a particular entry in the snmpTargetAddrTable.
Bits which are 1 in the mask value indicate bits in the transport
address which must match bits in the snmpTargetAddrTAddress
value.
Bits which are 0 in the mask indicate bits in the transport address
which need not match. If the length of the mask is 0, the mask should
be treated as if all its bits were 1 and its length were equal to the
length of the corresponding value of snmpTargetAddrTable.
This object may not be modified while the value of the corresponding
instance of snmpTargetAddrRowStatus is active(1). An attempt to
set this object in this case will result in an inconsistentValue error.
DEFVAL { ''H }
Sequence
::= { snmpTargetAddrExtEntry 1 }
{ snmpTargetAddrEntry }
OCTET STRING,
Integer32

Advertisement

Table of Contents
loading

Table of Contents