McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 284

FC Management MIB
B
connUnitEventUnitId
connUnitEventIndex
E/OS SNMP Support Manual
B-36
Each entry contains information on a specific event for the given
Description
connectivity unit.
INDEX { connUnitEventUnitId, connUnitEventIndex }
Sequence
::= { connUnitEventTable 1 }
ConnUnitEventEntry ::=
SEQUENCE {
connUnitEventUnitId
connUnitEventIndex
connUnitEventId
connUnitREventTime
connUnitSEventTime
connUnitEventSeverity
connUnitEventType
connUnitEventObject
connUnitEventDescr
FcGlobalId
Syntax
read-only
Access
mandatory
Status
The connUnitId of the connectivity unit that contains this event table.
Description
Sequence
::= { connUnitEventEntry 1 }
INTEGER (1..2147483647)
Syntax
read-only
Access
mandatory
Status
Each connectivity unit has its own event buffer. As it wraps, it may
Description
write over previous events. This object is an index into the buffer. It is
recommended that this table be read using 'getNext's to retrieve the
initial table. The management application should read the event table
at periodic intervals and then determine if any new entries were
FcGlobalId,
INTEGER (1..2147483647),
INTEGER,
DisplayString,
TimeTicks,
FcEventSeverity,
INTEGER,
OBJECT IDENTIFIER,
DisplayString }