McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 302

Fw 08.01.00 mcdata e/os snmp support manual (620-000131-630, november 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

FC Management MIB
B
connUnitPortStatCountClass1TxFrames
connUnitPortStatCountClass1FBSYFrames
connUnitPortStatCountClass1PBSYFrames
E/OS SNMP Support Manual
B-54
Count of Class 1 Frames received at this port. Note, this is a Fibre
Description
Channel only stat.
Sequence
::= { connUnitPortStatEntry 14 }
OCTET STRING (SIZE (8))
Syntax
read-only
Access
mandatory
Status
Count of Class 1 Frames transmitted out this port. Note, this is a Fibre
Description
Channel only stat.
Sequence
::= { connUnitPortStatEntry 15 }
OCTET STRING (SIZE (8))
Syntax
read-only
Access
mandatory
Status
Count of times that FBSY was returned to this port as a result of a
Description
Class 1 Frame that could not be delivered to the other end of the link.
This occurs if either the Fabric or the destination port is temporarily
busy. FBSY can only occur on SOFc1 frames (the frames that
establish a connection). Note, this is a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 16 }
OCTET STRING (SIZE (8))
Syntax
read-only
Access
mandatory
Status
Count of times that PBSY was returned to this port as a result of a
Description
Class 1 Frame that could not be delivered to the other end of the link.
This occurs if the destination N_Port is temporarily busy. PBSY can
only occur on SOFc1 frames (the frames that establish a connection).
Note, this is a Fibre Channel only stat.
Sequence
::= { connUnitPortStatEntry 17 }

Advertisement

Table of Contents
loading

Table of Contents