McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 523

Sequence
Administrative assignments
Local Contexts
vacmContextTable
Syntax
Max Access
Status
Description
REVISION 9711200000Z
Description Initial version, published as RFC2275
::= { snmpModules 16 }
vacmMIBObjects OBJECT IDENTIFIER ::= { snmpVacmMIB 1 }
vacmMIBConformanc OBJECT IDENTIFIER ::= { snmpVacmMIB 2 }
e
SEQUENCE OF VacmContextEntry
not-accessible
current
The table of locally available contexts.
This table provides information to SNMP Command Generator
applications so that they can properly configure the
vacmAccessTable to control access to all contexts at the SNMP entity.
This table may change dynamically if the SNMP entity allows that
contexts are added/deleted dynamically (for instance when its
configuration changes). Such changes would happen only if the
management instrumentation at that SNMP entity recognizes more
(or fewer) contexts.
The presence of entries in this table and of entries in the
vacmAccessTable are independent. That is, a context identified by an
entry in this table is not necessarily referenced by any entries in the
vacmAccessTable; and the context(s) referenced by an entry in the
vacmAccessTable does not necessarily currently exist and thus need
not be identified by an entry in this table.
This table must be made accessible via the default context so that
Command Responder applications have a standard way of retrieving
the information.
This table is read-only. It cannot be configured via SNMP.
SNMPv3 MIB
SNMPv3 MIB
G-23
G