McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 183

Fw 08.01.00 mcdata e/os snmp support manual (620-000131-630, november 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Max-Access
Status
Description
Sequence
fcConnUnitProxyMaster
Syntax
Max-Access
Status
Description
Sequence
fcConnUnitPrincipal
Syntax
Max-Access
Status
Description
Sequence
fcConnUnitNumSensors
Syntax
Max-Access
Status
Description
read-only
current
24 bit Fibre Channel address ID of this connectivity unit. Following
the fibre channel standard, the right-most bit of the right-most octet is
for the least significant bit of the address value; the left-most bit of the
left-most octet, if needed, is for the most significant bit of the address
value. If this value is not applicable, all bits set to 1.
::= { fcConnUnitEntry 11 }
INTEGER { unknown(1), no(2), yes(3) }
read-only
current
A value of 'yes' means this is the proxy master unit for a set of
managed units. For example, this could be the only unit with a
management card in it for a set of units. A standalone unit should
return 'yes' for this object.
::= { fcConnUnitEntry 12 }
INTEGER {unknown(1), no(2), yes(3) }
read-only
current
Whether this connectivity unit is the principal unit within the group
of fabric elements. If this value is not applicable, return unknown.
::= { fcConnUnitEntry 13 }
Unsigned32
read-only
current
Number of sensors in the fcConnUnitSensorTable.
Fibre Alliance MIB
A
FA MIB
A-13

Advertisement

Table of Contents
loading

Table of Contents