McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 213

Description
Sequence
fcConnUnitLinkUnitTypeY
Syntax
Max-Access
Status
Description
Sequence
fcConnUnitLinkConnIdY
Syntax
Max-Access
Status
Description
Sequence
Port Statistics
fcConnUnitPortStatTable
Syntax
Max-Access
Status
The IP port number for the agent. This is provided in case the agent is
at a non-standard SNMP port.
::= { fcConnUnitLinkEntry 10 }
FcUnitType
read-only
current
Type of the FC connectivity unit as defined in fcConnUnitType.
::= { fcConnUnitLinkEntry 11 }
OCTET STRING (SIZE(3))
read-only
current
This is the Fibre Channel ID of this port. If the connectivity unit is a
switch, this is expected to be a 24-bit Big Endian value. If this is loop,
then it is the ALPA that is connected. If this is an e-port, then it will
only contain the domain ID. If not any of those, unknown or cascaded
loop, return all bits set to 1.
::= { fcConnUnitLinkEntry 12 }
There is one and only one statistics table for each individual port. For
all objects in statistics table, if the object is not supported by the conn
unit then the high order bit is set to 1 with all other bits set to zero.
The high order bit is reserved to indicate if the object if supported or
not. All objects start at a value of zero at hardware initialization and
continue incrementing till end of 63 bits and then wrap to zero.
SEQUENCE OF FcConnUnitPortStatEntry
not-accessible
current
Fibre Alliance MIB
A
FA MIB
A-43