McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 263

Status
Description
Sequence
connUnitContact
Syntax
Access
Status
Description
Sequence
connUnitLocation
Syntax
Access
mandatory
This object is used to control the addressed connUnit.
NOTE: 'Cold Start' and 'Warm Start' are as defined in MIB II and are not
meant to be a factory reset.
resetConnUnitColdStart
resetConnUnitWarmStart the addressed unit performs a 'Warm
offlineConnUnit
onlineConnUnit
NOTE: Each implementation may chose not to allow any or all of these
values on a SET.
::= { connUnitEntry 22 }
DisplayString (SIZE (0..79))
read-write
mandatory
Contact information for this connectivity unit. Persistent across boots.
::= { connUnitEntry 23 }
DisplayString (SIZE (0..79))
read-write
the addressed unit performs a 'Cold Start'
reset.
Start' reset.
the addressed unit puts itself into an
implementation dependant 'offline' state.
In general, if a unit is in an offline state, it
cannot be used to perform meaningful
Fibre Channel work.
the addressed unit puts itself into an
implementation dependant 'online' state.
In general, if a unit is in an online state, it
is capable of performing meaningful
Fibre Channel work.
Connectivity unit group
FC Management MIB
B
B-15