McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 135

FcConnUnitPortTransmitterType
Type
Product Mapping
Access
Description
fcConnUnitPortModuleType
Type
Product Mapping
Access
Description
FcConnUnitPortWwn
Type
Product Mapping
Access
bypassed value (8) means that the port has been manually or
automatically isolated from the loop or fabric; the other values are
essentially self-explanatory. Any value for this object may co-exist
with any value for the fcConnUnitPortState object.
The values are defined as unknown (1), unused (2), ok (3), warning
(4), failure (5), notParticipating (6), initializing (7), bypassed (8).
INTEGER
This is mapped from the port technology as not present and serial
indicate unknown(1), optical sw1g and optical sw2g indicate
shortwave(4). Optical lw1g and optical lw2g indicate longwave(5),
copper db9 and copper amp indicate copper(6).
R
The technology of the port transceiver. The values are defined as
unknown (1), other (2), unused (3), shortwave (4) longwave (5),
copper (6), and scsi (7), longwaveNoOFC (8), shortwaveNoOFC (9),
longwaveLED (10),
INTEGER
If the port is not installed, return gbicNotInstalled(8). Otherwise
return smallFormFactor(9).
R
The module type of the port connector. This object refers to the
hardware implementation of the port. The embedded value (4)
means 'fixed' (e.g., oneXnine).
The values are defined as unknown (1), other (2), gbic (3), embedded
(4), glm(5), gbicSerialId (6), gbicNoSerialId (7), gbicNotInstalled (8),
smallFormFactor (9).
FcNameId
World Wide Name of the port.
R
McDATA SNMP Support
Fibre Alliance MIB
2-113
2