McDATA SNMP Support
2
FcConnUnitPortStatCountInvalidTxWords
Product Mapping
FcConnUnitPortStatCountPrimitiveSequenceProtocolErrors
Product Mapping
FcConnUnitPortStatCountLossofSignal
Product Mapping
E/OS SNMP Support Manual
2-138
Number of frames received with invalid CRC. This count is part of
Description
the Link Error Status Block (LESB). (FC-PH 29.8). Loop ports should
not count CRC errors passing through when monitoring.
NOTE: This is a Fibre Channel only statistic.
Counter64
Type
stInvalidTxWords (Only supports low 32 bits of counter, high 32 bits
are set to zero).
R
Access
Number of invalid transmission words received at this port. This
Description
count is part of the Link Error Status Block (LESB). (FC-PH 29.8).
NOTE: This is a Fibre Channel only statistic.
Counter64
Type
stPrimSeqProtoErrors (Only supports low 32 bits of counter, high 32
bits are set to zero).
R
Access
Number of primitive sequence protocol errors detected at this port.
Description
This count is part of the Link Error Status Block (LESB). (FC-PH 29.8).
NOTE: This is a Fibre Channel only statistic.
Counter64
Type
stSigLosses (Only supports low 32 bits of counter, high 32 bits are set
to zero).
R
Access
Number of instances of signal loss detected at port. This count is part
Description
of the Link Error Status Block (LESB). (FC-PH 29.8).