McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 199

Max-Access
Status
Description
Sequence
fcConnUnitPortWwn
Syntax
Max-Access
Status
Description
Sequence
fcConnUnitPortFCId
Syntax
Max-Access
Status
Description
Sequence
gbic(3),
embedded(4),
glm(5),
gbicSerialId(6),
gbicNoSerialId(7),
gbicNotInstalled(8),
smallFormFactor(9) }
read-only
current
The module type of the port connector. This object refers to the
hardware implementation of the port. The embedded value (4)
means 'fixed' (e.g., oneXnine).
::= { fcConnUnitPortEntry 8 }
FcNameId
read-only
current
The World Wide Name of the port if applicable, otherwise empty
string.
::= { fcConnUnitPortEntry 9 }
OCTET STRING (SIZE(3))
read-only
current
This is the assigned Fibre Channel ID of this port. This value is
expected to be a Big Endian value of 24 bits. If this is loop, then it is
the ALPA that is connected. If this is an eport, then it will only
contain the domain ID left justified, zero filled. If this port does not
have a Fibre Channel address, return all bits set to 1.
::= { fcConnUnitPortEntry 10 }
Fibre Alliance MIB
A
FA MIB
A-29