McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 47

ifMtu
Type
Access
Description
ifSpeed
Type
Access
Description
ifPhysAddress
Type
Access
Description
ifAdminStatus
Type
Access
Description
INTEGER
R
The size of the largest datagram which can be sent/received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagrams, this is the size of the largest
network datagram that can be sent on the interface.
Gauge
R
An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain the
nominal bandwidth.
PhysAddress
R
The interface's address at the protocol layer immediately `below' the
network layer in the protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object should contain an octet
string of zero length.
INTEGER
RW
The desired state of the interface. The testing(3) state indicates that no
operational packets can be passed.
McDATA SNMP Support
MIB Definitions: MIB-II
2
2-25