Fibre Channel I/O Module Leds - HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Maintenance And Service Manual

Fibre Channel I/O module LEDs

The Fibre Channel I/O module has three bi-color LEDs. the following figure and table describe their
locations and meanings.
Item Name
1 Status
2
1-Gb link status
3
2-Gb link status
NOTE:
If both link status lights are Off, a link has not been established since the application of power,
initiation of a reset, hot-plug of Fibre Channel I/O module, removal of the transceiver, or
hot-plug of the transceiver.
If both link status lights are blinking amber, the MSA controller has been removed or a link cannot
be established.
1
2
3
Condition
Off
Solid
Blinking
Solid
Blinking
Solid
Blinking
15506
Description
Color
—
Power not applied to Fibre Channel
I/O module, controller not plugged
in, or unsuccessful controller POST
Green
Power applied and connection
established between Fibre Channel
I/O module and Fibre Channel
controller
Amber Power is applied but there is no
link to the controller or there is no
controller present
Green
A 1-Gb link is established and the
status is good
Amber A 1-Gb link was established but is
now inactive
Green
A 2-Gb link is established and the
status is good
Amber A 2-Gb link was established but is
now inactive
maintenance and service guide
27