Removing Or Installing A Fibre Channel Interconnect Blank; Before You Begin; Removing An Interconnect Blank; Installing An Interconnect Blank - HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Maintenance And Service Manual

Removing or installing a Fibre Channel interconnect blank

Before you begin

CAUTION:
• Before removing a component or blanking panel from an operational device, make sure that you
have the replacement part available. Removing a component or blank impacts the airflow and
cooling ability of the device. To avoid possible overheating, insert the new or replacement component
within one or two minutes. If the internal temperature exceeds acceptable limits, the device may
overheat and automatically shut down or restart.
• Parts can be damaged by electrostatic discharge. Use proper anti-static protection.

Removing an interconnect blank

•
Lift the port-colored module latch (1) and pull the module out of the chassis (2).

Installing an interconnect blank

Slide the blank into the MSA chassis bay until the blank clicks into place.
2
1
15596
maintenance and service guide
73