Table of Contents
Advertisement
To use the BMC Management Utility, configure your managed system with
the SYSCFG utility by performing the following tasks:
•
Obtain the latest version of DTK from the Dell Support website at
support.dell.com.
•
Create a BMC configuration CD containing a bootable image, and the
SYSCFG utility.
•
Configure BMC Users.
•
Configure BMC SOL access.
•
Configure BMC IPMI serial access.
Installation and Setup for Microsoft Windows PE Operating Systems
NOTE:
See the Deployment Toolkit User's Guide for additional information about
installing and using the utilities, and the Deployment Toolkit Command Line
Interface Reference Guide for a complete list of valid options, suboptions, and
arguments for using the SYSCFG.EXE to configure and manage your BMC.
The DTK components are provided as a self-extracting zip file on the Dell
Support website at support.dell.com. The self-extracting file can be opened
on any system running a Microsoft Windows operating system, or it can be
extracted at the Windows Command Prompt (cmd.exe) using the
PKUNZIP .EXE utility (not supplied with the Deployment Toolkit). By
default, the dtk-2.X-winpe-AXX.exe files are extracted to the root directory of
your local hard drive, for example, C:\. This location can be changed by giving
a different path when extracting the file. Perform the following steps to
extract the DTK components to a workstation running Windows:
1 Download the DTK file dtk-2.X-winpe-AXX.exe from the Dell Support
website at support.dell.com and save it on a system running a supported
Windows operating system.
2 After the zip file downloads, double-click the file.
3 Click OK.
4 Click Unzip.
By default, the DTK files are unzipped to C:\. The SYSCFG.EXE utility is
located in the C:\Dell\Toolkit\Tools directory. Dell-provided drivers are
located in the C:\Dell\drivers folder.
Configuring Your Managed System
37
Hide quick links:
Advertisement
Table of Contents
