Dell External OEMR 1435 User Manual page 122

Table B-4. Terminal Mode Configuration (continued)
Byte
2
122
Terminal Mode Commands
Explanation
[7:4]—Output newline sequence (BMC to console). Selects what
characters the BMC uses as the <newline> sequence when the
BMC writes a line to the console in Terminal Mode.
0h = no termination sequence.
1h = <CR-LF> (Factory default)
2h = <NULL>
3h = <CR>
4h = <LF-CR>
5h = <LF>
All other = reserved
[3:0]—Input newline sequence (Console to BMC). Selects what
characters the console uses as the newline sequence when writing
to the BMC in Terminal Mode.
0h = reserved
1h = <CR> (Factory default)
2h = <NULL>
All other = reserved