Figure 3-18. Configuring the Serial-Over-LAN for the Remote System, Example 2
•
If SOL is enabled, two BMC settings are displayed:
–
The communication baud-rate between the system serial port and the
BMC
–
The minimum BMC user privilege level required for activating
console redirection
SOL Proxy displays a list of valid values for each feature, as well as the
current value of the feature enclosed in a pair of brackets. Select the
number before a value to set it as the new setting, and press <Enter> to
confirm your changes. The new SOL settings are then displayed. See
Figure 3-19.
84
Using the BMC Management Utility