Dell External OEMR 1435 User Manual page 83

Configuring the SOL for the Remote Managed System
Select option 2 in the main menu.
NOTE:
You must be connected to the managed system's BMC before you can
configure the SOL features. If SOL Proxy is not yet connected to the managed
system's BMC, you are prompted for an IP address, a username/password
combination, and an IPMI encryption key. The IPMI encryption key value will be
ignored if no key was set at the BMC on the target server. See "Connecting to the
Remote Managed System's BMC" for more information.
The SOL configuration menu appears. According to the current SOL status,
the content of the SOL configuration menu varies:
• If SOL is already enabled, the current settings are displayed and you are
presented with three choices. See Figure 3-17.
Figure 3-17. Configuring the Serial-Over-LAN for the Remote System, Example 1
• If SOL is currently disabled, the options shown in Figure 3-18 are
displayed. Type Y to enable SOL or N to keep SOL disabled. See
Figure 3-18.
Using the BMC Management Utility
83