Dell External OEMR 1435 User Manual page 118

Table B-3. Terminal Mode Text Commands (continued)
Command
SYS SET
TCFG
SYS RESET
SYS POWER
OFF
SYS POWER
ON
118
Terminal Mode Commands
Switches Description
Returns the Terminal Mode Configuration bytes
where XX and YY represent hex-ASCII encoding for
the volatile version of data bytes 1 and 2 as specified in
Table B-4, and AA BB represent hex-ASCII encoding
of the non-volatile version.
V:XX <output termination sequence>
N:AA BB <output termination sequence>
-V XX YY Sets the volatile Terminal Mode Configuration. XX
and YY represent hex-ASCII encoding for data bytes 1
and 2 as specified in Table B-4. The BMC returns the
same output as for SYS SET TCFG, above.
-N XX YY Sets the non-volatile Terminal Mode Configuration.
XX and YY represent hex-ASCII encoding for data
bytes 1 and 2 as specified in Table B-4. The BMC
returns the same output as for SYS SET TCFG, above.
Directs the BMC to perform an immediate system
hard reset.
Directs the BMC to perform an immediate system
power off.
Causes the BMC to initiate an immediate system
power on.