Additional information for editing the grub.conf:
1 You may need to disable GRUB's graphical interface and use the text-based
interface instead; otherwise, the GRUB screen will not be displayed in
BMU console redirection. To do so, comment out the line starting with
splashimage.
2 If you have multiple options in GRUB and you want all of them to start a
console session through the BMU serial connection, add console=
ttyS1,19200 to all options. The preceding example shows console=
ttyS0,19200 added to only the first option.
Enabling Login to the Console After Boot
Edit the file /etc/inittab, as follows:
Add a new line to configure a getty on the COM1 serial port:
co:2345:respawn:/sbin/agetty -h -L 19200 ttyS0
vt100
See the sample file, which shows the addition of the new line.
Serial Port Console Redirection
129