Creating A Bootable Windows Pe 2.0 Iso Image - Dell External OEMR 1435 User Manual

9 Copy the SYSCFG.EXE utility to the root of the directory.
10 After you create an ISO image, you can use any CD
burn the image onto a CD.
You are now ready to use your bootable CD to configure the BMC on a
managed system. See the Deployment Toolkit User's Guide for additional
information.

Creating a Bootable Windows PE 2.0 ISO Image

If you are using Windows PE 2.0, download Windows Administrative
Installation Kit (WAIK) from the Microsoft website. By default, WAIK is copied
to the C:\Program Files\Windows AIK directory.
Integration of DTK Directory Structure in Windows PE Build
DTK provides a script, VPE_driverinst.bat, to pre-install the Dell drivers into
a base Windows PE 2.0 image offline. Use the following steps to execute
this script:
1 Open a command prompt on your system and change the directory to the
location of VPE_driverinst.bat. For example:
cd C:\Dell\Drivers\winpe2.x
2 Execute VPE_driverinst.bat with two required arguments
<WINPEPATH> and <DTKPATH>. For example:
VPE_driverinst.bat <WINPEPATH> <DTKPATH>
Where <WINPEPATH> is the destination path to create the directory
structure for Windows PE 2.0 and <DTKPATH> is the path to Dell
drivers in the extracted DTK toolkit. For example:
VPE_driverinst.bat C:\vistaPE_x86 C:\DELL\DRIVERS
NOTE:
<WINPEPATH> is passed as the destination to the WAIK command
copype.cmd
process, and should not already exist.
40
Configuring Your Managed System
. The destination folder C:\vistaPE_x86 is created as part of the
burning software to
-