Dell External OEMR 1435 User Manual page 82

To exit an active SOL session, use the <~><.> character sequence.
This sequence terminates SOL and returns you to the top-level menu.
Connecting to the Remote Managed System's BMC
NOTE:
While multiple SOL sessions can be active at the same time, only one
console redirection session can be active at any given time for a managed system.
1 Select option 1 in the main menu.
2 Enter the BMC IP address of the remote managed system.
3 Provide the BMC username and password for the BMC on the managed
system. The BMC username and password must be assigned and stored in
the BMC non-volatile storage. See "Configuring Your Managed System"
for more information about configuring BMC users. Only one SOL session
with one BMC is permitted at one time.
The connection status displays on the main menu. See Figure 3-16.
4 Provide the IPMI encryption key if it was configured in the BMC.
Figure 3-16. Connecting to the Remote System's BMC
82
Using the BMC Management Utility