B Error Messages - HP 6400/8400 User Manual

B Error messages

This list of error messages is in order by status code value, 0 to xxx.
Table 21 Error Messages
Status Code Value
0
Successful Status
1
Object Already Exists
2
Supplied Buffer Too Small
3
Object Already Assigned
4
Insufficient Available Data
Storage
5
Internal Error
6
Invalid status for logical disk
7
Invalid Class
8
Invalid Function
9
Invalid Logical Disk Block State
10
Invalid Loop Configuration
1 1
Invalid parameter
94 Error messages
Meaning
The SCMI command completed successfully.
The object or relationship already exists.
The command or response buffer is not large
enough to hold the specified number of
items. This can be caused by a user or
program error.
The handle is already assigned to an
existing object. This can be caused by a user
or program error.
There is insufficient storage available to
perform the request.
An unexpected condition was encountered
while processing a request.
This error is no longer supported.
The supplied class code is of an unknown
type. This can be caused by a user or
program error.
The function code specified with the class
code is of an unknown type.
The specified command supplied
unrecognized values. This can indicate a
user or program error.
The specified request supplied an invalid
loop configuration.
There are insufficient resources to fulfill the
request, the requested value is not
supported, or the parameters supplied are
invalid. This can indicate a user or program
error.
How to Correct
No corrective action required.
Delete the associated object and try
the operation again. Several situations
can cause this message:
Presenting a LUN to a host:
Delete the current association or
specify a different LUN number.
Storage cell initialize:
Remove or erase disk volumes
before the storage cell can be
successfully created.
Adding a port WWN to a host:
Specify a different port WWN.
Adding a disk to a disk group:
Delete the specified disk volume
before creating a new disk volume.
Report the error to product support.
Report the error to product support.
Reclaim some logical space or add
physical hardware.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Verify the hardware configuration and
retry the request.
Report the error to product support.