Entering The Storage System Password; Installing Hp P6000 Command View; Installing Optional Eva Software Licenses - HP 6400/8400 User Manual

NOTE: If you enter an incorrect WWN or checksum, the system will reject the data and you must
repeat the procedure.

Entering the storage system password

The storage system password feature enables you to restrict management access to the storage
system. The password must meet the following requirements:
8 to 16 characters in length
Can include upper or lower case letters
Can include numbers 0 - 9
Can include the following characters: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ ] ^ _ ` { | }
Cannot include the following characters: space ~ \
Complete the following procedure to enter the password:
1. Select a unique password of 8 to 16 characters.
2. With the default menu displayed, press
3. Press to display Change Password?
4. Press Enter for yes.
The default password, AAAAAAAA~~~~~~~~, is displayed.
5. Press
6. Press to accept this character and select the next character.
7. Repeat the process to enter the remaining password characters.
8. Press Enter to enter the password and return to the default display.

Installing HP P6000 Command View

HP P6000 Command View is installed on a management server. Installation may be skipped if
the latest version of HP P6000 Command View is running. Verify the latest version at the HP website:
http://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.html
See the HP P6000 Command View Installation Guide for more information.

Installing optional EVA software licenses

If you purchased optional EVA software, it will be necessary to install the license. Optional software
available for the Enterprise Virtual Array includes HP P6000 Business Copy and HP P6000
Continuous Access. Installation instructions are included with the license.
or to select the desired character.
three times to display System Password.
Procedures for getting started 33