Error Messages - HP Surestore 6164 - Switch Reference Manual

Error Messages

Diagnostics
Table 9. Diagnostic Tests for the 2250 Switch (continued)
Test
Cross Port Test
Spin Silk Test
SRAM Data
Retention Test
CMem Data
Retention Test
Switch Online
The error message log can be accessed through the Telnet command
errDump. Note any messages before removing power from the switch,
because error messages are stored in RAM and are lost when power is
removed.
For a detailed description of each error message, see the Fabric OS
Reference Manual.
Command Description
crossPortTest Checks all switch paths. Frames
transmitted by port M are looped
back using external cable and
received at port N. Switch must
be offline.
spinSilk Checks all switch paths at the
maximum speed of 1 Gbps.
Frames transmitted by port M
are looped back using external
cables, and when received by
port N are sent again by port M
in an external loop. Switch must
be offline.
sramRetention Verifies that data written into
Test ASIC memories is retained.
Switch must be offline.
CmemRetention Verifies that data written into
Test ASIC SRAMs is retained.
Switch must be offline.
switchEnable Returns switch to online state.
79