Error Messages; Error Messages - HP StorageWorks 4400 User Manual

5 Error messages

This list of error messages is in order by status code value, 0 to xxx.
Table 14 Error Messages
Status Code Value
0
Successful Status
1
Object Already Exists
2
Supplied Buffer Too Small
3
Object Already Assigned
4
Insufficient Available Data
Storage
5
Internal Error
6
Invalid status for logical disk
Meaning
The SCMI command completed success-
fully.
The object or relationship already exists.
The command or response buffer is not
large enough to hold the specified num-
ber of items. This can be caused by a
user or program error.
The handle is already assigned to an
existing object. This can be caused by
a user or program error.
There is insufficient storage available to
perform the request.
An unexpected condition was en-
countered while processing a request.
This error is no longer supported.
HP StorageWorks 4400 Enterprise Virtual Array user guide
How to Correct
No corrective action required.
Delete the associated object and
try the operation again. Several
situations can cause this message:
Presenting a LUN to a host:
• Delete the current association
or specify a different LUN
number.
Storage cell initialize:
• Remove or erase disk volumes
before the storage cell can be
successfully created.
Adding a port WWN to a host:
• Specify a different port WWN.
Adding a disk to a disk group:
• Delete the specified disk
volume before creating a new
disk volume.
Report the error to product support.
Report the error to product support.
Reclaim some logical space or add
physical hardware.
Report the error to product support.
Report the error to product support.
79