Configuring An Esx Server; Loading The Fca Nvram; Setting The Multipathing Policy - HP 6400/8400 User Manual

Enterprise virtual array
Hide thumbs Also See for 6400/8400:
Table of Contents

Advertisement

scsi-qla0-adapter-node=200000e08b0b0638;
scsi-qla0-adapter-port=210000e08b0b0638;
6.
Repeat this procedure for each ESX server.

Configuring an ESX server

This section provides information about configuring the ESX server.

Loading the FCA NVRAM

The FCA stores configuration information in the non-volatile RAM (NVRAM) cache. You must
download the configuration for HP Storage products.
Perform one of the following procedures to load the NVRAM:
If you have a HP ProLiant blade server:
1.
Download the supported FCA BIOS update, available on
downloads, to a virtual floppy.
For instructions on creating and using a virtual floppy, see the HP Integrated Lights-Out
user guide.
2.
Unzip the file.
3.
Follow the instructions in the readme file to load the NVRAM configuration onto each
FCA.
If you have a blade server other than a ProLiant blade server:
1.
Download the supported FCA BIOS update, available on
downloads.
2.
Unzip the file.
3.
Follow the instructions in the readme file to load the NVRAM configuration onto each
FCA.

Setting the multipathing policy

You can set the multipathing policy for each LUN or logical drive on the SAN to one of the following:
Most recently used (MRU)
Fixed
Preferred
ESX 2.5.x commands
The # vmkmultipath –s vmhba0:0:1 –p mru command sets vmhba0:0:1 with an
MRU multipathing policy for all LUNs on the SAN.
The # vmkmultipath -s vmhba1:0:1 -p fixed command sets vmhba1:0:1 with a
Fixed multipathing policy.
The # vmkmultipath -s vmhba1:0:1 -r vmhba2:0:1 -e vmhba2:0:1 command
sets and enables vmhba2:0:1 with a Preferred multipathing policy.
ESX 3.x commands
The # esxcfg-mpath --policy=mru --lun=vmhba0:0:1 command sets vmhba0:0:1
with an MRU multipathing policy.
The # esxcfg-mpath --policy=fixed --lun=vmhba0:0:1 command sets
vmhba1:0:1 with a Fixed multipathing policy.
The # esxcfg-mpath --preferred --path=vmhba2:0:1 --lun=vmhba2:0:1
command sets vmhba2:0:1 with a Preferred multipathing policy.
http://www.hp.com/support/
http://www.hp.com/support/
VMware
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 6400Storageworks 8400

Table of Contents