Figure 9 HSV450 controller rear view
1. Serial port
3. Controller health
5. Power
7. Mirror ports
9. Power supply 1
Figure 10 Controller front view
1. Battery 1
3. Blower 1
5. Operator Control Panel (OCP)
7. Unit ID
Operator control panel
The operator control panel (OCP) provides a direct interface to each controller. From the OCP you
can display storage system status and configuration information, shut down the storage system,
and manage the password.
The OCP includes a 40-character LCD alphanumeric display, six push-buttons, and five status
indicators. See
HP P6000 Command View is the tool you will typically use to display storage system status and
configuration information or perform the tasks available from the OCP. However, if HP P6000
Command View is not available, the OCP can be used to perform these tasks.
14
EVA6400/8400 hardware
Figure 1 1 (page
15).
2. Unit ID
4. Fault indicator
6. DPI ports
8. Fiber ports
10. Power supply 2
2. Battery 2
4. Blower 2
6. Status indicators