Configuring Virtual Disks From The Host - HP 6400/8400 User Manual

Enterprise virtual array
Hide thumbs Also See for 6400/8400:
Table of Contents

Advertisement

6.
Run vxdctl enable to notify VxVM of the changes.
7.
Verify the configuration of VxVM as shown in
(the output may be slightly different depending on your VxVM version and the array
configuration).
Example 3 Verifying the VxVM configuration
# vxddladm listsupport all | grep HP
libvxhpevale.so
# vxddladm listsupport libname=libvxhpevale.so
ATTR_NAME
=======================================================================
LIBNAME
VID
PID
ARRAY_TYPE
ARRAY_NAME
# vxdmpadm listapm all | grep HP
dmphpalua
# vxdmpadm listapm dmphpalua
Filename:
APM name:
APM version:
Feature:
VxVM version:
Array Types Supported:
Depending Array Types:
State:
# vxdmpadm listenclosure all
ENCLR_NAME
============================================================================
Disk
EVA84000
By default, the EVA I/O policy is set to Round-Robin. For VxVM 4.1 MP1, only one path is used
for the I/Os with this policy. Therefore, HP recommends that you change the I/O policy to
Adaptive in order to use all paths to the LUN on the primary controller.
iopolicy"
shows the commands you can use to check and change the I/O policy.
Example 4 Setting the iopolicy
# vxdmpadm getattr arrayname EVA8400 iopolicy
ENCLR_NAME
============================================
EVA84000
# vxdmpadm setattr arrayname EVA8400 iopolicy=adaptive
# vxdmpadm getattr arrayname EVA8400 iopolicy
ENCLR_NAME
============================================
EVA84000

Configuring virtual disks from the host

The procedure used to configure the LUN path to the array depends on the FCA driver. For more
information, see
HP
HSV300, HSV400, HSV450
ATTR_VALUE
libvxhpevale.so
HP
HSV300, HSV400, HSV450
A/A-A-HP
EVA4400, EVA6400, EVA8400
dmphpalua
dmphpalua
dmphpalua
1
VxVM
41
A/A-A-HP
A/A-A
Active
ENCLR_TYPE
ENCLR_SNO
Disk
DISKS
EVA8400
50001FE1002709E0
DEFAULT
CURRENT
Round-Robin
Round-Robin
DEFAULT
CURRENT
Round-Robin
Adaptive
"Installing Fibre Channel adapters" (page
Example 3 "Verifying the VxVM configuration"
1
A/A-A-HP
STATUS
CONNECTED
CONNECTED
49).
Active
ARRAY_TYPE
Disk
A/A-A-HP
Example 4 "Setting the
Oracle Solaris
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 6400Storageworks 8400

Table of Contents