Table of Contents
Advertisement
●
BASIC COPY MODES
Before Using Copying Functions
Default settings
This equipment is under its "default settings" when the power is
turned ON, namely, if no setting change has been applied yet,
the equipment's settings return to the default ones when the
energy saving mode is cleared or the [RESET] button on the
control panel is pressed. The default settings for basic copy
modes at installation are shown below.
Item
Reproduction ratio
Copy quantity
Paper selection
Simplex/Duplex
Density adjustment
Color mode
Original mode
Finishing mode
Feeding mode when using the
RADF
The default settings are changeable.
Confirming the set functions
If you press [SETTINGS] on the touch panel, the menu shown
below is displayed. On this menu, you can view the functions
that are currently set.
Default setting
100%
1
Automatic Paper Selection
(APS)
1-sided original -> 1-sided copy
Manual adjustment
FULL COLOR
TEXT/PHOTO
When using the document glass:
NON-SORT NON-STAPLE
When using the RADF
(Reversing Automatic Document
Feeder):
SORT
Continuous feed mode
Switching to the function setting menu
To change the functions on the current menu, press the
corresponding buttons. The desired setting menu will then
appear.
Clearing the set functions
If you want to clear any copy function setting, press [RESET]
on the corresponding setting menu.
However, for FULL IMAGE on the EDIT menu, also press the
highlighted button to clear the setting.
Clearing all settings changed
When you press the [RESET] button on the control panel, all
the function changes will be cleared.
- 43 -
BASIC COPY MODES
1
2
3
4
5
6
Advertisement
Table of Contents
