What To Look For; Making Adjustments - Xerox 2135N - Phaser Color Laser Printer Quick Reference Manual

What to look for

There are three things to look for in examining the test print.
The correct Black Density is determined by selecting the image in which
the foreground and background grays most closely match.
The correct Color Balance is determined by matching the "Current"
disk in the center with the gray background. The background is
produced using black only and the circles are produced using a
combination of cyan, magenta, and yellow.
The correct Color Density is determined by selecting the image in
which the foreground and background gray patterns most closely
match.

Making adjustments

Use the following procedures to make adjustments to the color density and
balance:
Black density adjustment
1. Press Item (2, 6) keys until you see
2.
Press Value (3, 7) keys until you see
Values are: -3K, -2K, -1K, 0, +1K, +2K, +3K.
3.
Press Enter. The Color Adjust Page prints and the front panel displays
Color Adjust Menu: Black Density
Repeat Steps 2 and 3 above until you are satisfied with the results.
Color density adjustment
1.
Press Item (2, 6) keys until you see
2. Press Value (3, 7) keys until you see
Values are: -3CMY, -2CMY, -1CMY, 0, +1CMY, +2CMY, +3CMY.
3. Press Enter. The Color Adjust Page prints and the front panel displays
Color Adjust Menu: Color Density
Repeat Steps 2 and 3 above until you are satisfied with the results.
78 Phaser 2135 Color Printer
Color Adjust Menu: Black Density.
Black Density = New Value
.
Color Adjust Menu: Color Density.
Color Density = New Value
.
.
.