Front cover
Warning
Switch off the power and disconnect the power cord.
1.
Open the top cover.
2.
Remove the drum/toner cartridges. Place them in a lightproof black
bag to protect the drum units from light and store in a safe place.
3.
Remove the duplex unit/paper tray.
4.
Remove the seven screws securing the cover to the printer frame.
Remove the cover by lifting it straight up.
Remove
Screws
G
G
Removing the front cover
Reverse these steps to install the front cover. Lower the front cover into the gap
created by the chassis and the fully-open top cover.
90
Phaser 2135 Color Printer
B
B
B
G
G
Front Cover
0725-10