Front Plate Assembly; Removing The Left Plate Assembly - Xerox 2135N - Phaser Color Laser Printer Quick Reference Manual

Front plate assembly

Warning
Switch off the power and disconnect the power cord.
1.
Remove printer unit chassis as shown on page 100.
2.
Remove the two screws from the front power supply fan. Let the fan
rest on the front of the lower plate.
3.
Disconnect the chassis fan from the front of the low-voltage power
supply.
4.
Remove the four screws securing the left plate assembly to the lower
plate.
5. Remove the assembly.
Disconnect Wiring Harness
Remove
Screws

Removing the left plate assembly

Reverse these steps to install the front plate assembly.
104 Phaser 2135 Color Printer
Lower Plate
Front Plate
Assembly
0725-22