Rtc Battery Removal - Toshiba Tecra M1 Series Field Replaceable Unit Documentation

FIELD REPLACEABLE UNIT DOCUMENTATION

RTC BATTERY REMOVAL

RTC cable
1. Disconnect the RTC battery cable from PJ1005 on
the system board.
3. Lift out the RTC battery.
SYSTEM BOARD REMOVAL
M2.5x10 black flat head screw
1. Remove four M2.5x4 black flat head screws and
one M2.5x10 black flat head screw securing the
system board.
2. Lift out the system board.
Tecra
M1 Series
PJ1005
RTC battery
System
board
M2.5x4 black flat head screws
TOSHIBA
Tough Enough for Today's World.
TM
SYSTEM BOARD REMOVAL
Glass tape
FAN
harness
PJ8770
Glass tape
PJ1004
1. Disconnect the DC IN jack from PJ8800 on the
system board.
2. Peel off the glass tape securing the FAN harness
and disconnect the FAN harness from PJ8770 on
the system board.
3. Peel off the glass tape securing the USB harness
and disconnect the USB harness from PJ1004 on
the system board
DC IN
jack
PJ8800
USB harness