System Reliability Considerations; Regulatory Specifications And Disclaimers; Safety Compliance - Intel SBX44 - Server Compute Blade Installation And User Manual

xxCAUTION:
When laser products (such as CD-ROMs, DVD-ROM drives, fiber optic devices, or
transmitters) are installed, note the following:
• Do not remove the covers. Removing the covers of the laser product could result in
exposure to hazardous laser radiation. There are no serviceable parts inside the device.
• Use of controls or adjustments or performance of procedures other than those specified
herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note
the following:
Laser radiation when open. Do not stare into the beam, do not view directly with
optical instruments, and avoid direct exposure to the beam.
xxCAUTION:
Hazardous energy is present when the blade is connected to the power source. Always replace
the blade cover before installing the blade.

System Reliability Considerations

To help ensure proper cooling and system reliability:
• Make sure that all microprocessor sockets always contain either a microprocessor heat sink filler
or a microprocessor and heat sink.
• Make sure that the clear plastic air baffle is properly installed over the retention mechanism
assembly.

Regulatory specifications and disclaimers

Safety compliance

USA:
Canada:
Europe:
International:
viii
UL 60950 - 3rd Edition/CSA 22.2. No. 60950
cUL certified - 3rd Edition/CSA 22.2. No. 60950- for Canada (product bears the single
cUL mark for U.S. and Canada)
Low Voltage Directive, 73/23/EEC
UL/CB to EN60950 3rd Edition
UL/CB to IEC 60950 3rd Edition
UL/CB - EN60 950 3rd Edition
UL/CB - EMKO-TSE (74-SEC) 207/94
Intel® Server Compute Blade SBX44: Installation and User's Guide