Relay Check - DKS 1814 Owner's Manual

5.3.3 Relay Check

The telephone entry system can be called and a check can be made to determine if any of the relays
in the system are in a "hold-open" mode. This check can be useful if your gate (or door) is held open
and you suspect that the telephone entry system relay may be the cause.
1. Call the telephone number that the entry system is installed on. The system will answer
with a short tone (beep).
2. Press * 1 6 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. The system will emit a series of short tones if the relay is in a continuous activation mode.
Relay 1 activated:
Relay 2 activated:
4. Press the programmed tone number _ to deactivate the relay (beep). The system will
automatically hang up.
beep - pause - beep - pause . . .
beep beep - pause - beep beep - pause . . .
46