Enabling Wep - Cisco AIR-PCM340 Installation And Configuration Manual

Chapter 4 Security Features
Step 2 On the Client Utility Basic Properties screen, click Set WEP Key (see
screen appears (see
Figure 4-13 WEP Keys Screen
The WEP key size identifies all existing WEP keys; for example: 128 bit or 40 bit.
Note
Step 3 Click Transmit Key next to the key you want to use to transmit packets.
Note
Click Apply.
Step 4

Enabling WEP

The client utility allows you to enable or disable WEP.
If the client utility is not active on your desktop perform the following steps:
Step 1
a.
b.
On the Client Utility Basic Properties screen (see
Step 2
Enable WEP check box.
Note
Click Apply.
Step 3
OL-1377-01
Figure 4-13).
To protect WEP key security, the existing WEP keys do not appear on the screen.
You can delete a WEP key by selecting the Clear Key check box to the right of the key.
From the Finder menu bar on the top of the screen, select Go and click Applications (see
Figure 4-10). The Applications window appears.
Double-click the Aironet Client Utility icon. The client utility screen appears, and the computer
searches for the client adapter radio. After the radio is found, the basic properties screen appears.
You can disable WEP at any time by deselecting the Enable WEP check box.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Security Options for Mac OS X
Figure
Figure 4-11), you can enable WEP by clicking the
4-11). The WEP key
4-15