Cisco AIR-PCM340 Installation And Configuration Manual page 55

Chapter 4 Security Features
b. RF Network Parameters screen (see
pull-down menu (see
Figure 4-7
Step 2 Select the Enable WEP check box in the Basic Properties screen or RF Network Parameters screen.
Note
Click Apply.
Step 3
To enable LEAP, refer to the
OL-1377-01
Figure 4-5) and click the RF Network Parameters tab.
RF Network Parameters Screen
You can disable WEP at any time by deselecting the Enable WEP check box.
"LEAP" section on page
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Figure 4-7) by selecting Edit Properties from the File
4-11.
Security Options for Mac OS 9.x
4-9