Cisco AIR-PCM340 Installation And Configuration Manual page 121

Chapter 7 Performing Diagnostics
The Status Screen appears (see Figure 7-2).
Figure 7-2
Table 7-1 describes each client adapter setting for which a status is displayed.
Table 7-1
Client Adapter Setting
Radio Type
Firmware Version
Driver Version
Boot Block Version
Short Radio Headers
OL-1377-01
Status Screen
Client Adapter Status
Description
A description of your client adapter's radio. For example, 802.11 DS
indicates that the radio is an IEEE 802.11-compliant direct-sequence
spread spectrum radio.
The version of the firmware that is currently running on your client
adapter.
The version of the driver that is currently installed on your computer.
The version of the boot block firmware that is currently in your client
adapter. The boot block firmware contains identification information
for the client adapter and functions to start up the radio and pass control
to the main firmware, which (unlike the boot block) can be modified
and upgraded by the user.
Indicates whether your client adapter is set up to use short radio.
headers.
Value: On, Off, or Unknown
Note
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Refer to the Short Preamble parameter in
information on using short radio headers.
Diagnostic Tools for Mac OS 9.x
Table 5-4 for
7-3