Cisco AIR-PCM340 Installation And Configuration Manual page 105

Chapter 6 Advanced Configuration on Mac OS X
The advanced connection properties screen is similar to the basic properties screen but allows you to
specify a client name for your client adapter and up to three network names or SSIDs (see Figure 6-8).
Figure 6-8
Table 6-4 lists and describes the client adapter's system parameters on the advanced connection
parameters screen. Follow the instructions in the table to initially set or change any parameter. Click
Apply at the bottom of the advanced connection properties screen to save any changes you have made,
or click Cancel to exit the client utility.
Table 6-4
Parameter
Location
Client Name
OL-1377-01
Client Utility Advanced Connection Parameters Screen
Advanced Connection Properties Screen Parameters
Description
Specifies different wireless network profile settings used in various locations,
such as your office, home, factory, or airport. For each profile, you can specify
unique connection parameters required for that operating location. For
additional information see the
Range: Up to 16 locations can be specified
Default: Default
A logical name for your client adapter. It enables an administrator to quickly
determine which devices are connected to the access point. This name is
included in the access point's list of connected devices.
Range: Up to 16 characters
Note Each computer on the network should have a unique client name.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Using the Client Utility on Mac OS X
"Location Profiles" section on page 6-6.
6-11