For A Home Network - Cisco AIR-PCM340 Installation And Configuration Manual

Security Options for Mac OS 9.x

For a Home Network

After you have created or selected a WEP key, follow the steps below to enable WEP.
Step 1 Open the Home Networking screen (see
pull-down menu (see
Figure 4-8
Step 2 Select the Enable WEP for Home Network check box in the Home Networking screen.
Note
Click Apply.
Step 3
To enable LEAP, refer to the
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
4-10
Figure 4-5) and clicking the Home Networking tab.
Home Networking Screen
You can disable WEP at any time by deselecting the Enable WEP for home network
check box.
"LEAP" section on page
Figure 4-8) by selecting Edit Properties from the File
4-11.
Chapter 4 Security Features
OL-1377-01