Chapter 5
Advanced Configuration on Mac OS 9.x
Configuring Your Client Adapter
Setting Home Networking Parameters
The parameters in this section can be used to configure your client adapter for use in a home
(non-enterprise) network. If you are planning to use your client adapter in an enterprise network, go to
the "Setting Enterprise Parameters" section on page 5-6.
The Home Networking screen (see Figure 5-10) enables you to set parameters that prepare the client
adapter to operate in a home network. To access this screen, select Edit Properties from the File
pull-down menu (see Figure 5-5 on page 5-7) and click the Home Networking tab.
Figure 5-10 Home Networking Screen
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
5-21
OL-1377-01